Find Out What Ghost Immobiliser Problems Tricks Celebs Are Using

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your valuable possession from theft. This system is discreet & doesn't require additional key fobs in order to operate.

ghost immobiliser fitting  makes use of buttons on your vehicle (steering wheels doors, door panels and the centre console) to create a unique pin code sequence that can be altered up to 20 times. This will then allow your vehicle to begin.

Simple process to change the PIN code

Many homeowners are upgrading their security due to the increase in vehicle theft. There are a variety of security devices that are sold aftermarket from tracking systems to alarms and immobilisers. However, not all of them are equally effective at protecting your car. While a tracking system may assist in finding your vehicle in the case of theft, it can not stop the crime from occurring in the first instance. An immobiliser, on the other hand, does exactly what it says on the label: it shuts off the engine of your car so that it is unable to be started. The Autowatch Ghost is one of the most sophisticated options available, making it almost impossible for thieves steal your vehicle.

The ghost device uses the buttons on your car to create a unique sequence which must be entered to allow the engine to start. This can be done by using the window, heater or indicator stalk buttons. In addition to this it is possible to use a mobile app which can function as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is an excellent option if you want to give your car to valet parking or for servicing. The immobiliser will remain in operation.

The Ghost is an innovative and unique device that works with the buttons of your vehicle instead of as a standalone device. It is not only an effective deterrent to theft of your vehicle and vandalism, but it can be used on future vehicles you own. This makes it a far better investment than a conventional wheel lock.

Weatherproof, tiny device

The Autowatch ghost immobiliser is a sophisticated security system that guards your car from key cloning, hacking & ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus to stop the motor. It can be plugged into the vehicle without the need for extra wiring and has been extensively tested to ensure that it is compatible with all vehicles. It is also immune to jamming devices that are a popular technique used by thieves to circumvent immobilisers.

The benefit of CAN data over conventional systems is that they operate silently. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies as well as recognized by conventional diagnostic tools. The Autowatch ghost doesn't produce LED indications and uses the buttons in your vehicle, such as the steering wheel or centre console panels to create a unique, customizable disarm sequence. The sequence can be extended 20 or more presses for additional security. The iPhone app only allows one connection, with the Ghost's unique pairing code. the Ghost. All communication between the two devices is protected.

The Ghost prevents car thieves adding an ignition key replacement or replacing the ECU to bypass the immobiliser. The engine can only be started when a valid PIN code is entered. It is possible to operate temporarily in the Valet/Service mode (with parameters set, such as a 30mph speed limit) and, therefore, you can give your car to valet or service without entering a code.

Every vehicle is tested

The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser that connects to your vehicle's existing wiring and connects to your engine control unit (ECU). The device intercepts electronic signals that block the system of your vehicle from going through its normal initialization process until you enter the passcode you have created. The system can be turned on and off by using your smartphone's app without the need for additional wires.

The standard factory immobilisers work by using a transponder that is built into the key. This sends a message to the ECU. The car will start if the correct code is sent. However, if the transponder from a different vehicle is used instead, the immobiliser doesn't recognize it. This allows the vehicle to be stolen and then started. The Ghost immobiliser has been developed by a South African company at the forefront of vehicle security systems technology. It shields you from hacking or key cloning, and even key theft. Only by physically towing your vehicle away from thieves could they take it away, and they would still not be able drive it.

Ghost uses the buttons in your vehicle, including the indicator stalk as well as the steering wheel and door panels to create a unique PIN sequence that can be changed that must be entered before you can drive. This is done without additional hardware, like key fobs. It can take up 20 to 20 presses. It is also undetectable to diagnostic equipment and doesn't transmit radio frequency signals, which means thieves are unable to use sophisticated RF scanning or code grabbing techniques to determine if security systems have been installed.

Ghost is more difficult to get rid of than car alarms, which require disarming by pressing several buttons. This makes it an excellent alternative to a GPS tracker, which can help locate your car after it has been stolen.

Emergency PIN code override

You do not have to look long on social media sites to find stories or videos of cars that have been stolen with the latest technology tools. This includes key-cloning devices and hacking devices that allow you to start your car without the original keys.

The Ghost immobiliser was specifically designed to prevent this, and give you an additional layer of security in order to keep your vehicle from being targeted by thieves. It works by creating an unique pin code push sequence using your existing buttons on the steering wheel, door panel and the centre console. The unique pin code is entered alongside the original key fob to prevent the engine from starting. The unique override pin can be found on a black card which you will receive following the installation. It is simple to remember since there are no LED indicators.

The device is hidden in the wiring of the vehicle and doesn't emit radio signals. This means it can't be detected by diagnostic software that can tell what type of security systems you have installed. This makes it an excellent alternative to the tracker.

In contrast to other security systems which use a relay in engine bay, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to shut down a vehicle completely, by sending a digital block to the ECU and engine.

They can also be connected to a separate alarm immobiliser or tracker. This must be specified prior to the installation. They are also fully service/valet-mode compatible and a good alternative to a tracker if you are you have your car checked for repairs to an electrical issue at the dealership.

Service/Valet mode

In recent years there has been a rise in the number of vehicles stolen without the owner's keys. It's easier than ever before to take your joy and pride due to the availability of key cloning devices and door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if you keys have been cloned.

It directly communicates with your car's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent since it doesn't use radio frequencies or a key fob. This means it isn't detected by diagnostics or any other car hacking devices. It also stops the user from using the new ECU or key to bypass the system since only the PIN code allows the engine to start.

The device is hidden inside your vehicle and is accessible via buttons on your steering wheel, center console and door panels. A unique and reversible PIN code sequence up to 20 digits needs to be entered before you can start your car.

This is the first aftermarket immobiliser CAN bus that has been developed that can prevent your car from being started or driven away in the event that a PIN code hasn't been entered prior to. If you are driving away with the device in motion it will display an indicator on your dashboard which will flash continuously for approximately 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to function normally. If you do not enter your PIN code at this point, the warning will continue to flash and require a new PIN code every attempt to start your vehicle.